Gaussmeter Tesla Meter w/Ns Magnetic Field Fluxmeter Surface Instrument Portable

Description

Gaussmeter Tesla Meter w/Ns Magnetic Field Fluxmeter Surface Instrument Portable
Description
- Gauss meter WT10A the fluxmeter surface magnetic field tester with Ns function
- Handheld digital WT10A gauss meter used to measure the magnetic field of the permanent magnet material surface, DC motors, speakers, magnetic separator, permanent magnetic separator magnetic field demagnetization and the leakage of the magnetic field, parts machining residual magnetic field. The instrument can be portable, wide measuring range, easy to operate, clear LCD.
Specifications
- Measuring range: 0 to 200mT milli-Tesla of - 2000mT millitesla
- Basic error: +-2percent +-3 word (below 1000mT millitesla of)
+-5percent +-3 words (over 1000mT millitesla)
- Resolution force: 0.1mT millitesla, 1mT cents Benitez
- Measured magnetic field: a DC magnetic field (static magnetic field)
- Ambient temperature: 5 Degrees Celsius ~ 40Degrees Celsius
- Relative Humidity: 20 percent to 80 percent (non-condensing)
- Power supply: 4 *No. 5 batteries & external power supply
- Dimensions: 148mm × 70mm × 25mm
- Instrument Weight: 260g
- Display mode: the measurement of the 3 1/2 LCD has a positive, negative, n represents N pole, negative represents S pole
- Display units: mT millitesla the
Remarks: 1mT millitesla = 10Gs Gaussian
How to work
Step 1: Connection: connect the Hall probe with the instrument;
Step 2: Power on: Press the “ON/OFF” switch on the panel of handhold Gauss meter and there shall be display on the panel meter, it represents the instrument power has been energized and measurement can be done;
Step 3: After the power is energized, firstly select a corresponding range according to the magnetic field size of the measured object.
Step 4: Zero point correction: Place the Hall probe in the area whose magnetic field is zero. When the meter reading is not zero, adjust “Zero” potentiometer till the reading is zero.
Step 5: Magnetic field measurement