Permanent Magnet Gauss Meter Tesla Tester Surface Magnetic Field Test 3600 mT

Description

Permanent Magnet Gauss Meter Tesla Tester Surface Magnetic Field Test 3600 mT
1.1 Features
This is a versatile magnetic field measurement instrument equipped with a high sensitivity, low drift Hall sensor,
And applied advanced digital signal processing technology, suitable for measuring the surface magnetic field of permanent magnet materials, remanence of mechanical parts,
DC constant magnetic field, magnetic separator or iron separator, etc. Can be used as a basic magnetic parameter measuring instrument in the production of magnetic materials
Manufacturers and application units, machinery manufacturing enterprises, university scientific research units, etc.
2.2 Features
△
Magnetic field measurement up to 36
00 mT (36 kG) with measurement uncertainty of class 0.5 (DC).
△
DC measurement mode: suitable for measuring the magnetic flux density of a constant magnetic field or permanent magnet.
△
AC measurement mode (option): suitable for measuring space alternating
magnetic field, the frequency range is 1 Hz ~ 400 Hz.
△
Magnetic field polarity display: The interface directly displays the N/S polarity of the magnetic field.
△
One-key unit switching: the value can be selected from mT (milliterabyte), G (Gaussian), 1 m
T = 10 G.
△
One-key reset function: used to eliminate the influence of zero drift on measurement before measurement.
△
Maximum value hold: It is convenient to record the maximum magnetic field value when the magnetic field changes rapidly.
△
Over-limit war
ning function: The upper or lower limit of the measurement can be set, and an alarm will be automatically prompted if the limit is exceeded.
△
With a standard RS232 interface, it can be connected with a computer to form an automatic test system.
△
Small si
ze, light weight, low power consumption, very suitable for carrying to on-site measurement.
△
The standard configuration is a radial Hall probe, and an optional axial probe can be used to adapt to different application scenarios.
△
Zero drift calibration (
option): It can be equipped with a special magnetic shielding cavity to realize the calibration of the zero drift of the instrument.
1.3 Specification:
Range
30 mT
300 mT
3000 mT
①
resolution
1 μT
10 μT
0.1 mT
Measuring range
3 mT
～
3600 mT
Frequency Range
DC
，
AC 1 Hz
～
400 Hz
best measurement uncertainty
(k=2)
DC
：
0.5%*RD
②
+ 100 μ
AC
③：
5%(RMS measurement)
Temperature Coefficient
± 0.1% / K
Zero drift
± 0.1 mT/h
Display digits
5-digit decimal display
Power supply
AC ( 220 ± 22 ) V, ( 50 ± 2 ) Hz
Working environment
0 °C ~ 50 °C, 40% ~ 85% R H, no condensation
Storage environment
-20 °C ~ 70 °C, < 80% R H, no condensation
size
230 mm × 200 mm × 90 mm (W×D×H
weight
3 kg
Communication Interface
Hall probe input interface
RS232 interface
Remark
①
: The actual calibration only covers up to 2.5 T.
Remark
②
: RD is the reading value.
Remarks
③
: Standard is DC measurement mode, AC measurement mode is optional, please specify when ordering